Bender EDS460-DG, Руководство по эксплуатации

Страница: 55 / 76

Operation
55 TGH1429en/10.2008
6.4.5 Menu 5: External devices
This menu can be used for setting and operating external devices con-
nected via the BMS bus to this EDS460-DG. In this way, settings at other
EDS460-DG can be carried out, for example.
The menu items of the external devices available via this function are
displayed on the EDS460-DG. Modifications of the external device set-
tings are stored automatically in the external device.
After calling up this menu, the address and type of devices already
stored will be displayed. The display will be updated every five minutes.
Use the UP/DOWN keys to set the address of the external device and
confirm with the
↵
key.
The device is being searched:
External devices connected to the BMS bus or switched on
for the first time are displayed by the EDS460-DG not until
a few minutes later in the external devices list. You don't
need to wait for the list to appear. You can select and set
the external device immediately via the address.
Exit
1.EDS460-D
2.EDS460-L
3. --
2:EDS460-L