III-2. Platform Installation
The Orbi-Shaker includes a flat non-slip platform for low speed operation with many
common vessels, including trays and dishes. For installation of any of the optional
platform the user must:
1.) Unscrew the four metal, platform screws from the corners of the internal
platform and remove the green rubber mat.
2.) Clean any dirt or debris from the metal base-platform and apply the desired
optional platform so that the four corner holes are aligned.
3.) Screw in the four plastic, platform screws tightly by hand.
* I you have ordered the optional MAGic Clamp platform, the installation procedure
is slightly different than the above. These instructions are included with the
platform. If you are unable to locate these instructions, please contact your
supplier.
III-3. Maintenance:
The platform of the Orbi-Shaker should be cleaned regularly with a soft cloth
dampened with water or alcohol. (Always ensure that the machine has been
powered down prior to cleaning.
In the event of a spillage: Power down the unit, remove the platform and dry the
internal chamber with a soft cloth. DO NOT attempt to operate the unit until the
spillage had been properly dried.
IV-1. Service and Contact
Service on the Orbi-Shaker should only be performed by qualified service personnel.
To request service or technical support, please contact Benchmark Scientific
Products or your local Benchmark Scientific representative.
Ph: +1-908-769-5555 Fax: +1-908-222-1864
Em:
P.O. Box 709 Edison, NJ 08817, USA
Содержание Orbi-Shaker
Страница 1: ...Operations Manual...
