28
GUIDE BAR MAINTENANCE
When the guide bar shows signs of wear, reverse it on the saw to distribute the wear
for maximum bar life. The bar should be cleaned every day of use and checked for
wear and damage. Feathering or burring of the bar rails is a normal process of bar
wear. Such faults should be smoothed with a file as soon as they occur. A bar with
any of the following faults should be replaced.
• Wear inside the bar rails which permits the chain to lay over sideways.
• Bent guide bar.
• Cracked or broken rails.
• Spread rails.
In addition, the guide bar has a sprocket at its tip. The sprocket must be lubricated
weekly with a grease syringe to extend the guide bar life. Use a grease syringe to
lubricate weekly with chain oil by means of the lubricating hole. Turn the guide bar
and check that the lubrication holes and chain groove are free from impurities.
TRANSPORTING AND STORING
• Do not store or transport the chainsaw when it is running. Always remove the
battery pack before storing or transporting.
• Always place the guide bar sheath on the guide bar and chain before storing
or transporting the chainsaw. Use caution to avoid the sharp teeth of the chain.
• Clean the chainsaw thoroughly before storing. Store the chainsaw indoors,
in a dry place that is locked and/ or inaccessible to children.
• Keep away from corrosive agents such as garden chemicals and de-icing salts.
5240-050
60V 16-INCH CORDLESS CHAINSAW
