19
FIG. 17
FIG. 18
3. The green LED light of the charger will flash continuously during normal charging.
4. After charging is complete, the charger light will turn to a solid green light.
Power indicator
(Fig. 18).
This Li-Ion battery pack is equipped with a power indicator which is used to show
the battery packs remaining charge. Press the power indicator button to check
battery charge. The LEDs will stay lit for approximately 4 seconds.
To obtain the best life from the battery
NOTE:
1. Never allow the battery to completely discharge before recharging. The battery
pack should be placed on the charger whenever the battery pack is noticeably
running down or the tool no longer performs a task it previously performed.
2. Avoid conducting short charges. Make sure that the battery is fully charged
each time by allowing the charger to complete its full charging cycle.
3. Avoid allowing loose items like screws or nails etc. to be stored with battery
packs as these or similar items can short battery packs' life and cause a fire
or explosion.
4. Always unplug the charger when not in use and store in a dry and secure place.
5. Avoid charging or storing your battery in temperatures below 5°C and above
45°C.
6. After use, allow the battery pack to cool down for approximately 30 minutes
before attempting to recharge.
Inserting and removing the battery pack
NOTE:
Hold the tool and the battery pack firmly when installing or removing the
battery pack. Failure to hold the tool and the battery pack firmly may cause them
to slip off your hands and result in damage to the tool and battery pack, potentially
causing a personal injury.
