Benassi MC 3300 Скачать руководство пользователя страница 18 | Manualshive

Страница: 18 / 22

Benassi MC 3300 Скачать руководство пользователя страница 18

OPERATION AND MAINTENANCE MANUAL

Page 18 of 22

Maintenance

General guidelines

Warning: only trained and informed staff should perform the maintenance operations described in

this manual.

Warning: only the producing firm or the retailer of the machine should perform specific maintenance

operations.

While performing maintenance operations, the machine should be in a stable position.

Never neglect maintenance: the life and the efficiency of the machine also depend on how it is

maintained.

Never repair the machine temporarily; always do it properly and permanently.

During those maintenance operations in which the operator may touch chemical substances, please notice
the following warnings:

We remind to those who operate the machine that when using chemical substances you should

follow the instructions shown on the safety tables, which must be provided by the producer of the
substance. Please follow the instructions shown on the packing.

Engine

For the details related to maintenance operations of the engine, please consult the
manual provided by the firm producing the engine, handed in with the machine.

Gear: checking the oil level

The machine must be switched off and placed on a flat surface.

Every 100 working hours, check the oil level through the specific gauge.

Picture 14 – Gear oil level

If the oil is down the minimum level, you need to check for spillage, then fill up the oil, using proper tools and
methods.

Plug with
level gauge

Hole for
filling up

Danger of bruising

Danger: chemical substances

and hot surfaces

Use suitable gloves and

clothes

Danger: hot surfaces

Operations to be performed by
trained and informed staff,
when the machine is cold and
not running

«
...
16
17
18
19
20
...
»

Содержание MC 3300























Отзывы:

Нет отзывов