S.p.A.
F 1900
6
-Picture 8- -Picture 9-
MAINTENANCE
•
For changing the oil and other maintenance operations on the motor (spark plugs, air filter, regulations), refer to
the motor manual provided.
•
NB: To unscrew the oil drain plug of the motor, disassemble the rear cover (Fig. 8 Ref. B).
•
Make a regular check of the oil level in the gearbox w ith the cap (Fig. 5 Ref. A) and topping up if necessary .
•
Change the oil completely every 200 hours. Empty the gearbox of oil by unscrew ing the oil drain plug (Fig. 5 Ref.
C)
•
Let the oil drain completely . After screw ing back the cap tightly , fill to the correct level w ith new oil
recommended by the manufacturer. Fig. 5 Ref. "A".
•
If the grass is not cut in a satisfactory manner despite the adjustments, the blade must be sharpened or
replaced. For replacement as follow s :
1. Remove the cable of motor spark plug.
2. Put on a pair of gloves.
3. U nscrew the grass divider (Fig.1 - Ref. “6”).
4. Loosen the 4 knife holder.
5. Remove the blade and put the new or the sharpened one, only after having greased it.
6. Rescrew the knife holder, adjusting them in such a w ay as the blade can slide w ell.
7. Fasten the grass divider and reapply the cable of the spark plug
Fasten the grass divider and reapply the cable of the spark plug
•
For any mechanical repair, especially during the w arranty period, w e recommend to go to a specialised repair
shop of the dealer.
•
For transporting convenience, the handles can be disassembled by means of the tw o knobs (Fig. 8 Ref. A). The
same is recommended for the cutting bar, w hich is easily disassembled by removing the special split pin on the
bar support (Fig. 9). Alw ay s use gloves and apply the protective strip to the blade.
•
Regularly check that screw s are tight. Pay special attention to the screw s fastening the bar to its support
CAUTION
It is advised not to keep the motor running when the machine is not
being used for its specific purpose
.
WARRANTY
The machines and accessories are guaranteed for 12 months, w ith the ex ception of electrical parts or parts in
rubber. The manufacturer shall replace pieces recognised as defective free of charge. Labour and transport shall be
at the ex pense of the purchaser. W arranty requests must be made through dealers authorised by the
manufacturer.
W ith regard to materials not of our manufacture, w ith special reference to the motor, the rules laid dow n by the
respective manufacturers shall apply . Any requests for repair shall therefore be directed to the specific service
centres in the respective areas.
For any problem or repair, contact the dealer w here the machine w as purchased.
