6
Failure to tighten the various stem bolts correctly can lead to serious accidents. To check that the handlebar is
firmly fixed, take hold of the handlebar grips with both hands:
-
Check by rotating up or down that the handlebar is firmly attached to the stem. Blocking the front
-
wheel between your 2 legs, check by turning left and right that the stem is firmly fixed on the fork
crown.
No movement should be observed. If there is still movement, tighten the various bolts to reach the maximum
tightening torque of 6 Nm. If in doubt, check the technical information or contact our support team via our
website www.bemoov-bikes.be
ATTENTION !
!
STEP 5 :
Tighten the 4 bolts of the stem cover crosswise in a clo-
ckwise direction, following the diagram above. Tighten each
bolt equally, so that the space between the cover and the
stem body is uniform for the 4 bolts. (maximum tightening
torque: 6 Nm*). Do not tighten the stem cap. *Newton meter
1
4
2
3