10
Installation-
Magnet Bracket
200799_1
With the fire pushed to the rear of the opening
.
Install the
Magnet Bracket,
as shown in
Diagram 12
, using the supplied
2 x No.8 x15mm Domed-Head
Screws
, to fix into the pre-drilled holes in the
MDF Framework,
this will ensure the bracket is fitted centrally in
the opening.
Before fixing in position align the tabs on either end of the bracket with the face of the finished wall
surface, as shown in
Diagram 13.
This will ensure the bracket is installed at the correct distance from the front face for the magnet to engage
correctly with the trim in a later procedure
.
Diagram 12
Diagram 13
Finished Wall
Surface
Tab
Tab
Finished Wall
Surface
