200688_6
Page
2
Please unpack carefully ensuring that any loose parts and all packing items are removed. Read any warning labels carefully (see Maintenance
Section). Place waste packaging back into box and dispose of RESPONSIBLY.
The surround/appliance must be positioned so that plug or fused spur is accessible. Only when you are certain that you have completed
the installation should you plug in and switch on at the wall socket.
Before You Start
•
The appliance Data Plate is located Underneath the Heater box – Disconnect from the mains supply before removing the Glass as
described in the maintenance section.
•
Required for installation: 500mm x 42mm x 18mm MDF batons (Not Supplied), 4 off No.6 x ¾” wood screws (Not supplied)
•
This fire should not be installed into an open / existing fireplace without the opening being professionally blanked off to reduce the risk of a
back draught, which could cause the safety cut-out to operate..
Installation:
Figure 1 – Installation Recess / Surround Dimensions (All Dims are in mm)
•
Ensure that the installation aperture dimensions are as to the above specification, please note that this fire should not be installed into an
open / existing fireplace without the opening being professionally blanked off to reduce the risk of a back draught, which could cause the
safety cut-out to operate..
•
Affix the two 500mm x 42mm x 18mm MDF batons to the aperture as shown in Fig.1.
•
Remove the Glass panel by removing the two glass retaining brackets as shown in Fig.2. Ensure the glass panel is placed in a safe
place.
•
Swing the unit into the opening and rest the bottom of the fire onto the bottom of the recess as shown in Fig.3.
•
Marble Suite with integrated batons:
Fix the fire into position using the fixing holes in the sides on the chassis (ensure suitable screws
are used) as shown in Fig.4.
Timber / MDF:
Fix the fire into position using the fixing holes in the front of the chassis (ensure suitable screws are used)
Figure 2 – Glass retaining brackets Figure 3 – Installation
Figure 4 – Chassis Fixing
