8
The data of Heart rate, blood pressure and blood oxygen
measurement are for reference only and cannot be used as a
basis for medical related aspects.
Charging
Before start using the device, please make sure the battery is
charged. For charging, please use the provided magnet charging
cable. The recommended power adaptor current is 5V, 1A. It
takes about 2 hours to fully charge device. Please follow the
steps below to the charge.
1.
Place the connector of the
charging cable under the device
so that its pins contact the metal
points in the device charging
terminal.
2.
Magnetic connector will place it self in right position.
3.
Connect the charging cable to the power source using the USB
connector.
4.
Charging animation will display on the device screen. Note: if
the device was completely discharged then animation of
charging may appear after a few minutes.
Installing APP for Phone and pair with Device
Note: mobile phone must support Android 5.1 or IOs 8.0 or
above and Bluetooth 4.0 or above. The device is supported by
mobile application
“
HARD - App Store / HARDSPORT - Google
Play Store
”, in manual called “APP” that can be
downloaded and
installed from
Apple “
App store
”
or
“
Google Play Store
”
on your
smartphone. While pairing, the phone should be connected to
the Internet. Make sure that the smartphone is set to "Visible to
all nearby Bluetooth devices" when pairing. Pairing the device
with the phone via APP:
1.
Activate Bluetooth on your phone
2.
Open the application and click "Device", and "Search device"
3.
Click on the name of your device in the device list. If the
connection is successful, the app will synchronize data from the
