7
U S E R M A N U A L
EN
Extended user guide available on www.bemi-electronics.com
Product description
1.Screen
2.Charging terminal
3.HR sensor
4.Touch button
5.Thermometer
Smart band mode: TER
, in manual called “device”
. It is
mandatory to read this manual before start to using the device.
The
device is controlled
by a touch button, hereafter called TB.
To turn on the device, press the TB for 5 seconds or connect to
the charger.
To wake up the device press TB. To go to the next
screen press TB. To enter the submenu or activate function,
press and hold for TB 3 seconds.
Maintaining Equipment
Clean the device regularly, especially part that close to the skin,
to keep it dry. Adjust the tightness of the device belt to ensure
air circulation. On wrist, where wearing device should not use
excessive skin care products. If you have skin allergy or
discomfort, please stop wearing device. Do not wear the device
during a hot bath or shower. Do not expose the device to
cleaning agents, caustic agents or other chemicals. Do not
expose the device t
o high (over + 50 ° C), low (below
-
10 ° C)
temperatures or heat due to, for example, sunlight or other heat
source. It may damage the device. The product is not suitable for
children and infants.
Note:
IP67
means that this device is
resistant to dust, rain, moisture and a single immersion in
standing water for a short time. Exposing the device to tougher
conditions can damage it. This device is not intended for water
sports, diving and swimming.
