Beltronics Vector 945, Руководство пользователя

Страница: 25 / 32

22
PROBLEM
V945
beeps briefly at the same
location every day, but no radar
source is in sight.
V945
does not seem sensitive
to radar or laser.
V945
did not alert when a
police car was in view.
V945
did not provide a Safety
signal while within range of an
emergency vehicle.
V945
’s display is not working.
V945
’s audible alerts are less
loud after the first few alerts.
SOLUTION
• An X-band motion sensor or intrusion alarm is located
within range of your route. With time, you will learn
predictable patterns of these signals.
• Make sure that windshield wipers do not block
V945
’s radar antenna and that the laser lens is not
behind tinted areas.
• Determine if your vehicle has an Instaclear ® ,
ElectriClear
®
or solar reflective windshield which may
deflect radar or laser signals.
•
V945
may be in City All Mode.
• VASCAR (Visual Average Speed Computer and
Recorder) a stopwatch method of speed detection,
may be in use.
• Officer may not have radar or laser unit turned on.
• Safety transmitters may not be commonly used in
your area.
• Press the
DARK
button to return to full Bright Mode.
•
V945
is in AutoMute Mode. See page 8 for details.
Troubleshooting