Beltone myPAL Pro, Инструкция по эксплуатации

Страница: 6 / 27

10 11
Getting Started
Before using your myPAL Pro, you need to charge the recharge-
able battery. To charge it, plug the charging cable into the myPAL
Pro as shown in the picture below.
Next, plug the other end of the charging cable into the charger
and into a power outlet.
During the charging process, the status LED indicator will show
a solid red light. When fully charged and still connected to the
charger, the LED will turn solid red, interrupted by a green blink
every 2 seconds.
Charging an empty battery typically takes about 3 hours. It is safe
to leave the charger connected overnight –
the battery cannot be overcharged.
• When charging your myPAL Pro for the first time, let it charge
for at least 3 hours, even if the battery indicator indicates that
the battery is fully charged.
• For safety reasons, recharge the battery only with chargers
supplied by Beltone.
i
Note: To protect the myPAL Pro when not in use, please
place it in the carrying pouch delivered with the product.
Do not charge the myPAL Pro while it is on your body.