Belson Outdoors CAMBRIDGE CA8NB-P Скачать руководство пользователя страница 4

Страница: 4 / 5

www.belson.com

STEP #1:

PLACE THE CENTER BENCH BOARDS ON A LEVEL SURFACE WITH THE PILOT HOLES FACING UP.

ON EACH SIDE OF THE CENTER BENCH BOARDS, PLACE ( 1 ) ONE SIDE BENCH BOARD WITH

THE PILOT HOLES CLOSEST TO THE CENTER BENCH BOARDS AND FACING UP.

STEP #2:

PLACE ( 1 ) ONE BENCH END IN POSITION, AS SHOWN ABOVE, BEING SURE TO ALIGN THE PRE-

DRILLED HOLES TO THE PILOT HOLES IN THE BENCH BOARDS. AFTER THE HOLES ARE PROPERLY

ALIGNED, FASTEN WITH ( 1 ) ONE #12 X 2-1/2” FLAT HEAD PHILLIPS SCREW PER HOLE TO SECURE.

NOTE: DO NOT TIGHTEN SCREW COMPLETELY. THIS WILL BE DONE IN A LATER STEP.

#12 X 2-1/2” FLAT HEAD

PHILLIPS SCREW

Содержание CAMBRIDGE CA8NB-P

Страница 1: ...111 North River Road North Aurora IL 60542 Phone 800 323 5664 Fax 630 897 0573 sales belson com Model CA8NB P Instructions Sheet www belson com CAMBRIDGE RECYCLED PLASTIC MEMORIAL PARK BENCH ...

Страница 2: ...ASSEMBLY PLEASE MAKE SURE ALL COMPONENTS ARE INCLUDED FP FASTENER PACK 1 ONE FASTENER PACK A CENTER BENCH BOARD 4 FOUR CENTER BENCH BOARDS B BULL NOSED BENCH BOARD 2 TWO BULL NOSED BENCH BOARDS C BENCH END 4 FOUR BENCH ENDS ...

Страница 3: ...www belson com 1 3 PHILLIPS DRIVE BIT ALSO NEEDED FOR THIS ASSEMBLY WILL BE THE FOLLOWING MATERIALS 48 12 X 2 1 2 FLAT HEAD PHILLIPS SCREW BEFORE ASSEMBLY PLEASE MAKE SURE ALL FASTENERS ARE INCLUDED ...

Страница 5: ...NG SURE TO ALIGN THE PRE DRILLED HOLES TO THE PILOT HOLES IN THE BENCH BOARDS AFTER THE HOLES ARE PROPERLY ALIGNED FASTEN WITH 1 ONE 12 X 2 1 2 FLAT HEAD PHILLIPS SCREW PER HOLE TO SECURE NOTE BE SURE TO TIGHTEN ALL SCREWS COMPLETELY AFTER THIS STEP 12 X 1 1 2 FLAT HEAD PHILLIPS SCREW ...