Belsimtek NS 430, Руководство пользователя

Страница: 14 / 86

DCS [ NS 430 ]
14 Screen
Screen
Left Screen Panel
The backup and active COM and VLOC frequencies are displayed on the left panel of the screen. To
switch between these blocks have to press the small left knob. To select the desired MHz use the large
knob; to select the kHz frequency - use the smaller knob. For example, set "115" and "400" for the
frequency of "115.400".
To switch between the active and standby frequency, use the C or V button respectively.
Below the frequency blocks are three fields with diagnostics:
• Data availability for the NAVter page - TER TST , TER N/A , TERRAIN , TER INHB и TER
FAIL
• CDI/RAIM modes : Landing approach (APR) , Destination point (TERM) , En-route (ENR)
• GPS integrity violation (currently it is assumed that the GPS is always integral and no
errors are present in the diagnostics)
Lower Screen Panel
The device status is displayed on the lower section of the screen:
• Navigation source: GPS , VLOC .
• Temporary suspension ( SUSP) or empty space (for normal operation/automatic sequencing)
• Illuminated message panel: Blinking MSG signal (new message) or blank space (no new
messages)
• Illuminated page panel ( NAV / WPT / AUX / NRST / FPL / MSG / PROC / DIRECTTO ) – displays
section name and page by order
Screen allotment
The device screen is divided into 3 parts: left side with the frequency display, bottom section displaying
the current status of the device, and the right side which contains a large number of pages, grouped
in blocks. Switching between blocks is carried out using the large right knob. Switching between pages
in
a block is done using the small right knob.