Belshaw Brothers 22650 Скачать руководство пользователя страница 41

Страница: 41 / 77

Belshaw Adamatic Bakery Group

•

www.belshaw-adamatic.com

•

206-322-5474

•

[email protected]

Donut Robot Mark II / Mark V TS

MN-1013EN

THE CONVEYOR IS JAMMED.

Possible Causes

What To Do

WARNING

To avoid being burned or otherwise injured,

before doing any of the following, turn off the

machine and allow the shortening to cool.

Cooked food particles are wedged between a

chain opening and a sprocket tooth.

Clean to remove the food particles. Clean the Donut

Robot regularly and thoroughly.

The turner slot is packed with cooked food

particles.

Clean to remove the food particles.

The drop plate is out of position and is

interfering with the conveyor.

Reposition the drop plate.

Something is interfering with the free movement

of the turner cam and cam weight.

Remove the obstruction.

The heating element is bent and is interfering

with the turner.

Straighten the heating element.

The turner is out of position and is catching on a

flight bar below.

Lift and move the outfeed end of the conveyor to

disengage the conveyor coupling from the conveyor

drive shaft. Turn the conveyor back 2-3 pockets.

The turner will return to the correct position.

The conveyor drive shaft and the drive motor

shaft are out of alignment.

Remove the cover of the drive assembly. Loosen the

four mounting spacers so the drive assembly can be

moved. Align the motor shaft with the conveyor

shaft. When they are aligned, tighten the mounting

spacers. Replace the cover.

Содержание 22650









































































Результаты поиска

Содержание 22650

Отзывы:

Бренды по названию

Популярные бренды

Belshaw Brothers 22650, Руководство оператора

Результаты поиска

Содержание 22650

Отзывы:

Бренды по названию

Популярные бренды