Bellwave BSM-856, Руководство пользователя

Страница: 15 / 31

-15-
User’s Manual (preliminary)
3.4
Vendor-specific AT Commands
3.4.1
Vendor-specific command by Qualcomm
Command Description Operation
$QCDMG Transition to Diagnostics
Monitor (DM) operation
This command will return “OK” and then
transition the phone serial port to DM
Mode. DM Mode runs at 38.4Kbps and
uses a proprietary half-duplex protocol.
&V
Dump Configuration
parameters
This command will dump the status of all
AT Parameters. This includes the single
letter parameters not otherwise readable,
but does not include the +QC parameters
&C0
&C1
&C2
Carrier Detect Pin
behavior
C0: leave Carrier Detect pin Asserted at
all times.
C1: Carrier Detect pin Asserted when
mobile is on the Traffic Channel,
otherwise de-asserted
C2: Carrier Detect Asserted at all times
but will wink when the Traffic Channel
drops.
$QCSO= Set Data Service Option
number set; saves to non-
volatile memory
0:= pre-707 SO numbers
1:= proprietary SO numbers
2:= IS-707 SO numbers
$QCCAV
Answer incoming voice
call
This command provides a means to
answer an incoming voice call via an AT
Command.
$QCVAD= Pre-arrangement setting;
respond to Page message
that has a Voice service
option with Page response
that has a Data service
option
0:=Off
1:=Fax for next call
2:=Fax for all calls
3:=Async for next call
4:=Async for all calls