H
02
01
BABY CHAIR WITH WHEELS
INSTALLATION INSTRUCTIONS
Insert the wheel into the
bottom of the booster
chair.
CHILDREN CHAIR
INSTALLATION INSTRUCTIONS
Flip the seat upside down on a
clean platform or the ground, and
install the four lower legs.
Follow the steps of the baby high
chair to finalize the installation of
the low chair.
NOTE:
For the assembly of the high
and low chair, make sure that the legs
are correctly positioned and that the
support is fixed.
PRODUCT MAINTENANCE
• To clean, wipe gently with a damp cloth. The cover cannot be washed in
a washing machine.
• When the chair is not in use, clean it, dry it, and keep it stored in a cool,
dry environment.
• Don't place the chair in a place where it will be exposed to direct sunlight
to avoid aging and fading of the plastic and the cover.
• If the parts such as inserts and saddle screws are loose, please repair
them in time.
• Do not get near fire or expose to high temperatures, and do not place it
in a dark, damp place.
• Please replace or repair damaged parts in time.
• Do not use it if the baby chair is damaged or broken.
• Always check that all parts of the highchair are working correctly before
using the product.
• When the child is sitting in the baby chair, please do not move it.
• Before use, make sure that no part of your child’s body is stucked in the
movable part of the baby chair.
• Make sure the seatbelt is fastened.
• To prevent the child from falling or slipping from the dining chair, the
seatbelt must be used.
• It is forbidden to put the child on the tray.
• Do not leave your child alone in the absence of care to avoid danger.
• It is forbidden to use at the pool, in rugged and dangerous places.
• The cover cannot be washed in a washing machine. It is recommended
to use a damp cloth.
• It is forbidden for children under 6 months. The proper use of this
product is between 6 months and 3 years of age, or a maximum of 18kg.
• Please read this manual carefully and keep it for future reference.
WARNING
The illustrations used in this manual intended to indicate the parts of the
product, its assembly method, and its operation. There could be minor
differences with the actual product.
Please understand that the appearance and the structure and are merely
illustrative.
13
