Bellucci Slim Latte Automatic Coffee Machine
Instruction Manual
Page 14 of 21
Cleaning the milk container and connection milk tube
Note:it is important to do this step daily to make sure the function of automatic milk frother running in
good condition.
1.
Empty the milk inside the milk container and wash it with fresh water, take out the connection rubber
and container milk tube to wash it with fresh water too, then assemble them to the lid again (make sure
the connection is fit and correct)
2.
Clean the both end of milk connection milk tube with fresh water, to make sure the hole on the milk
tube connector is clean(see picture),you can use needle or bristle of brush to clean the hole.
3.
Fill the milk container with fresh water and connect to the machine with container milk tube
4.
Using Frothing milk function by pressing the Cleaning button
, the water in milk container can clean
the connection tube internal. You can stop the cleaning by press the Cleaning button
again.
Turning Off the machine
Switch off the appliance by pressing the power on/off button.
Auto-Shut off
The Appliance is equipped with auto-shut off. Depending on the mode you have selected the appliance will
have different auto-shut off timing
(SEE “Further Setting –
III Mode Selec
tion”).
