BELLTEC TM48GRS, Руководство по установке и эксплуатации

Страница: 20 / 30

18
AUGER MAINTENANCE: dirt, sand, rock cuttings, or other debris may filter into
the square tube of the auger, preventing alignment of the lower hole in the
square shaft drive stem. If allowed to become impacted, the pressure of the end
of the square shaft could cause the debris to expand and split the tube. If
necessary, remove the pilot from center of the auger and drive dirt out with a
rod or a shaft.
On rock augers, watch the hardfacing, if worn
away, re hardface. Failure to do so will allow
excessive wear on pockets, and will ruin auger.
We trust you will find the information in this book
helpful to your successful operation of the BELLTEC
DRILLING MACHINE. We realize that it is not possible
to cover every condition that may be found in the sometime complicated job of
drilling holes in mother earth.
However, we want to be helpful in any way we
can, therefore, we invite you to call us when
you need assistance, that you may receive the
satisfaction that hundred of others have found
with this unique machine.