Cordless Telephone Operation
9
Receiving Calls
1.
When the phone rings, the display will
show “RING.” If you have Caller ID, the
d i s p l a y w i l l s h o w t h e C a l l e r I D
information after the first ring.
2.
With the
HANDSET
off the base, press
the button.The Call Timer starts to
count.
3.
To end your conversation, either press the button or place the
HANDSET
on
the
BASE UNIT
. If you place the
HANDSET
on the
BASE UNIT
CHARGE CRADLE,
you activate the AUTOMATIC STANDBY feature.
NOTE:
The Call Timer will start to count once you press the button.
Minutes
Seconds or Channel (Press
the
DEL/CHAN
button to
display the channel.)
Call Timer Display
02 08
Preparing for Use
Before you can use your cordless telephone, you must charge the
HANDSET
for 12
hours. Failure to do so will require recharging of the BATTERY PACK more often.
1.
Place the
HANDSET
on the
BASE UNIT
for 12 hours.
2.
After 12 hours, remove the
HANDSET
from the
BASE UNIT
.
Before you can use your cordless telephone, you must charge the HANDSET
for 12 hours. Failure to do so will require more frequent charging of the
BATTERY PACK. See page 27 for more information on the BATTERY PACK.
NOTE:
Depending on the frequency of use, once the
HANDSET
is fully charged, it remains
functional for approximately 4 hours of continuous use and approximately 5 days when
the
HANDSET
is off the
BASE UNIT
in STANDBY mode.
TALK
IMPORTANT
In order to utilize the Caller ID feature, you
must subscribe to Caller ID service from
your local telephone company.
TALK
Содержание MH9110
Страница 42: ...Notes 35...
