Desk Mounting
One of the special features of your telephone is the unique design of the MOUNTING BRACKET
which can hold your phone at an angle of 30° and 60° when desk mounting. There are three
positions to choose from:
1.
NORMAL POSITION (MOUNTING BRACKET not required):
For normal position, as shown in Figure 1, place
the
BASE UNIT
on any desired but suitable
location.
2.
30° POSITION (See Figure 2):
With the back of the
BASE UNIT
facing up, insert
the hooks of the MOUNTING BRACKET (with the
position as shown in Figure 3) into the upper four
slots of the
BASE UNIT
. Then slide the MOUNTING
BRACKET upward until it locks into place.
3.
60° POSITION (See Figure 4):
With the back of the
BASE UNIT
facing up, insert
the hooks of the MOUNTING BRACKET (with the
position as shown in Figure 5) into the lower four
slots of the
BASE UNIT
. Then slide the MOUNTING
BRACKET upward until it locks into place.
Wall Mounting
You may choose to put the
BASE UNIT
of your cordless telephone on a wall.
1.
With the back of the
BASE UNIT
facing up, connect
the SHORT TELEPHONE LINE CORD to the
TELEPHONE LINE CONNECTION JACK.
2.
Insert the free end of the SHORT TELEPHONE LINE
CORD through the hole of the MOUNTING BRACKET.
3.
Insert the hooks of the MOUNTING BRACKET into
the matching slots on the back of the
BASE UNIT
(following the arrow direction for the WALL
MOUNT). Then slide the MOUNTING BRACKET until
it locks into place. Plug the free end of the SHORT
TELEPHONE LINE CORD into the MODULAR WALL
JACK.
4.
Align the upper keyhole of the MOUNTING BRACKET
with the upper stud of the wall plate, so that the
opening end of the MOUNTING BRACKET matches
the lower stud, then pull the
BASE UNIT
down until
it is securely seated.
Desk Mounting
8
FIGURE 2
FIGURE 3
FIGURE 1
FIGURE 5
FIGURE 4
MOUNTING
BRACKET MODULAR
WALL JACK
WALL
PLATE
WALL PLATE STUD
SHORT TELEPHONE
LINE CORD
Содержание MH9110
Страница 42: ...Notes 35...
