1.
Button:
Press and hold down to record memo messages.
2.
Button:
Press to set/check the day and time.
3.
(OUTGOING MESSAGE) Button:
Press and hold down to record OGM messages.
4.
Button:
Press to erase messages.
5. CHARGE TERMINALS:
For charging the
HANDSET
BATTERY PACK. For best
performance, clean the CHARGE TERMINALS periodically with a damp cloth.
6. SPEAKERPHONE LED Indicator:
Lights up when the
BASE UNIT
speakerphone function
is activated.
7. IN USE/CHARGE LED Indicator:
(IN USE) Lights up to indicate that the
HANDSET
is in
TALK mode. (CHARGE) Lights up when the
HANDSET
is placed on the
BASE UNIT
for
charging.
8. ANSWER FUNCTION ON/OFF (ANS. ON/OFF) LED Indicator:
Lights when the answer
function is turned ON.
9. MICROPHONE
10.
(ANSWER FUNCTION ON/OFF) Button:
Press to activate or deactivate the answer
function.
11.
Button:
Press to PAGE the
HANDSET
. Press again to stop.
12.
Button:
Press and hold to set the 3-digit Remote Access Code for remote operation.
13. MESSAGE ALERT:
Set switch to ON to generate a “beep” sound every 12 seconds when a
new message has been received.
14. ANNOUNCE ONLY/INCOMING MESSAGE Switch:
ICM
- System records the incoming messages.
ANNC
- System plays your announcement and then hangs up without recording messages.
15. RINGER ON/OFF Switch:
Set switch to OFF position to disengage the ringer on the
BASE
UNIT.
16. RING SELECT Switch:
To select the number of rings before the Answering System answers
a call.
3R
- System answers a call after the third ring.
5R
- System answers a call after the fifth ring.
TS (TOLL SAVER)
- System answers after the third ring only if you have new
messages. Otherwise, the system will answer after the fifth ring.
17.
(MAILBOX 1) Button:
Press to activate functions for MAILBOX 1.
MEMO
BASE UNIT Controls
TIME
OGM
ERASE
ANS
ON/OFF
PAGE
CODE
1
DSST~MAN4~9762.qxd 11/12/2002 2:46 PM Page 8
