Federal Communications Commission Requirements (continued)
This equipment should not be used on coin telephone lines. Connection to party line
service is subject to state tariffs. If trouble is experienced, disconnect this equipment
from the telephone line to determine if it is causing the malfunction. If the equipment is
determined to be malfunctioning, its use should be discontinued until the problem has
been corrected.
NOTE
:
This equipment has been tested and found to comply with the limits for a class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications.
However, there is no guarantee that interference will occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures.
1.
Reorient or relocate the receiving ANTENNA.
2.
Increase the distance between the equipment and the receiver.
3.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
4.
Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
EXPOSURE TO RADIO FREQUENCY ENERGY.
The design of your BELLSOUTH Cordless Phone, which generates Radio Frequency
(RF) Electromagnetic Energy (EME), complies with the following national and
international standards and guidelines.
The Relevant Guidelines and Standards are:
•
FCC Report and Order FCC 96-326 (August, 1996)
•
American National Standards Institute (C95-1-1992)
•
National Council Radiation Protection and Measuremants (NCRP-1986)
•
International Commision on Non-Ionizing Radiation Protection (ICNIRP-1998)
FCC Requirements
