Getting Started
6.
Insert one plug of the TELEPHONE LINE CORD into the house TELEPHONE JACK
and the other end into the TELEPHONE LINE CONNECTION JACK at the back of
the
BASE UNIT
. (If you have an older 4-prong TELEPHONE JACK, you will need an
RJ-11C TELEPHONE JACK ADAPTOR. This adaptor is available at the same place
you purchased your telephone.)
7.
Raise or reposition the ANTENNA on the
BASE UNIT
for the best reception.
8.
We recommend not placing this unit next to appliances. Doing so may cause
interference.
9.
Place the
HANDSET
BATTERY PACK into the BATTERY COMPARTMENT with the
TERMINAL PLATES facing the CONTACT SPRINGS in the BATTERY
COMPARTMENT.
10.
S l i d e t h e
HANDSET
BATTERY
COMPARTMENT COVER firmly into
place in its closed position.
11. IMPORTANT: Before initial use, charge
the HANDSET for 12 hours.
12.
TONE/PULSE Select Switch:
A
. If your home is equipped with a tone
dialing system, set the TONE/
PULSE Select Switch to the TONE
position.
B
. If you have a rotary dialing system,
set the TONE/PULSE Select Switch
to the PULSE position.
C
. If you are unsure which system you
have, set the TONE/PULSE Select
Switch to the TONE position. Press
the
button on the
HANDSET
and make a call. If the call connects,
leave the switch as is; otherwise set
to the PULSE position.
7
AC ADAPTER
Raise the
ANTENNA
BASE UNIT
TELEPHONE LINE CORD
TELEPHONE
JACK
120V WALL
OUTLET
TONE/PULSE
SELECT SWITCH
TELEPHONE LINE
CONNECTION JACK
POWER-IN
CONNECTION
JACK
TERMINAL PLATES
BATTERY
COMPARTMENT
COVER
BATTERY PACK
CONTACT SPRINGS
Содержание GH9486
Страница 54: ...Notes 45...
