PART 2: INSTALLING THE VERTIcAL TELEVISION BARS
2-1. With the help of an assistant, and taking extreme
caution not to damage the front of your television, lay
the TV face-down on a flat, level, and very soft surface.
You may want to use soft blankets or towels to cushion
the face of the TV. Make sure the outer frame of the
television is supported, and that no pressure is applied
to the screen of the TV.
2-2. Locate the mounting holes on the back of your TV.
Place the Vertical Plastic Interior Bars (A3) over the
mounting holes in your TV as shown in Fig. 20 and
center vertically. If mounting the soundbar ABOVE the
TV, the small round bumps on the Plastic Interior bars
should be on the
left
side of both bars. If mounting
your soundbar BELOW the TV, they should be on the
right
side.
2-3. If mounting the soundbar BELOW the TV, place the
Vertical Metal Exterior Bars (A2) over the Vertical
Plastic Interior Bars (A3) with the protruding screws
toward the
bottom
as shown in Fig. 21. If mounting
ABOVE, place the Metal Bars with the screws toward
the
top
of the TV as shown in Fig. 22.
2-4. Select from the included hardware kit (Silver) the best
Washers and Screws to fit your model television's
mounting holes. You may need to try several to find the
right fit. Make sure the Screw you select fully inserts
through both vertical arms and into the hole. If it does
not go in all the way, select a slightly shorter Screw
from the hardware kit. (Fig. 23)
2-5. Insert the four Screws with Washers through the
Interior (A3) and Exterior (A2) Bars and partially screw
into the mounting holes on the back of your television
as shown in Fig. 23. Do not yet fully tighten, allow the
Vertical Metal Exterior Bars (A2) to slide up and down
the TV as needed to find the correct fit later.
fig. 20
fig. 21
fig. 22
fig. 23
To mount soundbar below TV
To mount soundbar above TV
A3
A2
A2