PART 3: INSTALLING THE SOUNDBAR
3-1. Attach the Horizontal Support Plate (A1) to the
protruding screws of the Vertical Metal Exterior Bars
(A2) and secure using two M8 Washers (SB) and two
M8 Nuts (AF). Make sure it is even and parallel with
the frame of the TV, then tighten fully. (Figs. 27 & 28).
3-2. With the help of an assistant to hold the soundbar in
place, attach the soundbar to the Universal Soundbar
Mount as you did in Part 1. Make sure the soundbar is
securely attached and positioned correctly in relation
to the television. Make all necessary adjustments.
3-3. Fully tighten all four Silver Mounting Screws in the
Vertical Bars (A2, A3) from Steps 2-4 and 2-5.
3-4. Mount the TV with the installed Universal Soundbar
Mount on to your wall mount or post mount furniture
according to the specifications of that manufacturer.
NOTE: To prevent damage, it is recommended that you
REMOVE your soundbar from the Universal Soundbar
Mount while you mount your TV. If your soundbar is
screw mounted, as shown on the bottom of page 7,
you may need to mount to the TV with the soundbar
already attached. In this case, please use 2 or more
people to lift the TV with attached soundbar. Make
sure the TV and soundbar are always supported to
avoid unintended damage from falling.
To mount soundbar below TV
To mount soundbar above TV
fig. 27
fig. 28
A1
A1
Af
SB
Af
SB
y
Z
W
x
Do not exceed the maximum weight capacity for your
wall mount or post mount furniture:
Weight of W + Weight of x + Weight of y
MUST
be less
than the manufacturer's stated maximum weight
capacity of Z.