9
10.
screw
two rear shelf support Posts (DsyF7) into the prethreaded holes in the rear CMs
®
Panel (DsyF17) as shown above.
Tighten fully by hand.
11.
screw
four shelf support Clips (DsyF8) into the prethreaded holes in the rear of the right and left side Frames (DsyF15, DsyF16) as shown.
NOTE: for the two BOTTOM Shelf Support Clips, make sure the small screw in each Clip is positioned upward before tightening fully, or else
this small screw will be difficult to tighten once the Glass Shelf is installed. for the MIDDLE Shelf Support Clip, the small screw can be
positioned either up or down. Make sure the small screw is not in too far so there is enough space for the Glass Shelves to be inserted later.
12.
APPly
four soft Glass Pads (DsyF9), evenly spaced, along the bottom edge of the Front wood Frame (DsyF11) as shown.
DsyF16
DsyF15
DsyF8
DsyF9
DsyF11
DsyF7
DsyF17
Fig. 4
