Bell'O 8220 Скачать руководство пользователя

Страница: 3 / 21

Precautions!

• This mounting bracket was designed to be installed and utilized ONLY as

specified in this manual. Bell’O International Corporation will not be

responsible for failure to assemble as directed or for the improper assembly,

use, or handling of this product.

• Improper installation of this product may cause damage or serious injury.

Bell'O International Corporation cannot be liable for direct or indirect damage

or injury caused by incorrect mounting, incorrect use, or incorrect assembly.

• If the mounting bracket will be attached to any structure other than those

specified in this manual, only a licensed professional contractor/installer should

perform this installation. The supporting structure must support, at minimum,

four times the combined weight of the mounting bracket and TV. It is the

responsibility and liability of the installer to ensure the suitability of the

supporting structure.

• This product should NEVER be mounted to metal framing studs.

• Check carefully to ensure that there are no missing or damaged parts.

Never use defective parts. If any parts are damaged or missing, call Bell'O

International Corporation at 888-779-7781 and parts will be shipped directly to

purchaser. Please contact Bell’O International Corp. before attempting to return

products to the point of purchase.

• Specifications are subject to change without notice.

• The maximum weight of your television cannot exceed the maximum weight rating

of your mount or any attached Bell'O

UL listed adapters sold separately, whichever

is lower.

English

NEVER exceed the maximum load capacity of 130 lbs (59 kg)

Содержание 8220






















Результаты поиска

Содержание 8220

Отзывы:

Похожие инструкции для 8220

Бренды по названию

Популярные бренды

Bell'O 8220, Руководство по установке

Результаты поиска

Содержание 8220

Отзывы:

Похожие инструкции для 8220

Бренды по названию

Популярные бренды