Bell'O 8210, Руководство по установке

Страница: 8 / 20

Table 1: Standard Monitor Mounting Configurations
Who is VESA?
The Video Electronics Standards Association is an international nonprofit organization
representing hardware, software, PC, display, and component manufacturers, cable and telephone
companies, and service providers. VESA supports and sets industry-wide interface standards for the
PC, workstation, and computing environments.
Standard
Standard
with Adapter 8190 (AP)
with Adapter 8190 (AP)
with Adapter 8190 (AP)
Choosing which screws to use
You’re probably wondering why so many screws came with this mount. The screw sizes follow
the standards set up by VESA for each mounting configuration. Before beginning, you may
need to test several of the screws in your hardware kit to find the correct size.
If you will be utilizing the 8190 Adapter Plates (AP) for larger mounting configurations, see page 9 before
proceeding.
Most monitors have the mounting holes flush with the back of the monitor. If yours is like
this, attach the monitor plate using the correct TV Mounting Screws as shown in Figure 1.
Make sure that the appropriate Washers (F, R or S) are placed between the screw and the
Monitor Plate (MP). Don’t place the washers between the monitor plate and the TV.
Don’t use screws that are too long because they will not fully seat in the holes and can
permanently damage the TV or mounting holes and cause the monitor to come loose.
7
English
Width (mm) Height (mm) Width (mm) Height (inch) Screw Size
75 75 3.0 3.0 4mm
100 100 3.9 3.9 4mm
200 100 7.9 3.9 6mm
200 150 7.9 5.9 6mm
200 200 7.9 7.9 6mm or 8mm