Bellman & Symfon BE1555, Руководство пользователя

Страница: 14 / 15

28 29
EN
Troubleshooting
If Try this
The CO alarm beeps for no
apparent reason.

Follow the detailed instructions in What to do when the
alarm sounds
section. If there are still problems:

Ensure there are no fuel burning appliances in the vicinity
which could be leaking CO gas (e.g. even from next door).

Ensure there are no fumes in the area (e.g. paint, thinners,
hair spray, chemical cleaners, aerosol sprays, damp proofing
done with and aqueous emulsion such as amino functional
siloxane and alkyl alkoxysilane.

Ensure there is no outdoor source of CO in the vicinity (e.g.
a car with engine running, heavy traffic, heavy air pollution,
barbecue fumes etc).

Ensure there is no source of hydrogen such as batteries being
charged (e.g. on boats or in Uninterruptable Power Supplies
(UPS)).

Ensure there is not excessive smoke or fumes from pipes,
especially those that use coal or charcoal.

Press the test/hush button to silence the alarm.

If the problem persists, the CO alarm might be defective and,
in that case, needs to be replaced.
The Visit receiver is triggered
for no apparent reason.

There is probably another Visit system nearby that triggers
yours. Change the radio key on all units, see Changing the
radio key
.
Nothing happens when I
press the CO alarm test/
hush button.

Check that the unit is secured correctly on the mounting plate.
Wait 15 s before testing again by pushing the test/hush button.

Check the age of the alarm, see the “replace by” label on the unit.
The CO alarm beeps when I
press the test/hush button,
but the Visit receiver is not
responding.

Check the Visit receiver batteries and connections.

Move the receiver closer to the CO alarm tomake sure it’s within
radio range.

Check that the units are set to the same radio key, see
Changing the radio key .
Service and support
If the product appears to be damaged or doesn’t function properly, follow the instructions in
this user guide. If the product still doesn’t function as intended, contact your local dealer for
information on service and warranty.
Warranty conditions
Bellman & Symfon guarantees this product for 2 years from date of purchase against any
defects that are due to faulty materials or workmanship. This guarantee only applies to normal
conditions of use and service, and does not include damage resulting from accident, neglect,
misuse, unauthorized dismantling, or contamination howsoever caused. This guarantee
excludes incidental and consequential damage. This guarantee does not cover costs associated
with the removal and/or installation of alarms Do not interfere with the product or attempt to
tamper with it. This will invalidate the guarantee, but more importantly may expose the user to
shock or fire hazards. This guarantee is in addition to your statutory rights as a consumer.
Model, type and classification
The information is available at the back of the CO alarm.