EN
3 Attach the unit
Place the smoke alarm unit on top of the baseplate and twist it clockwise to
attach it. Extend the antenna so that it points down.
4 Test the alarm
A
Press and hold the smoke alarm test button. The smoke alarm will
alarm and blink continuously until the button released.
B
The Visit receiver lights up a fire symbol in red and alerts with sound, flash
or vibration depending on which model of the Visit receivers you use.
Please note:
The smoke alarm will stop sounding shortly after the button
is released and the Visit receiver will time out within ~ 40s.
Minimum
10cm (4")
Minimum
10cm (4")
Battery
connectors
Base
9 Volt
battery
Battery
Minimum
10cm (4")
Minimum
10cm (4")
Battery
connectors
Base
9 Volt
battery
Battery
6
