![Bellini BOA605P Скачать руководство пользователя страница 20](http://html1.mh-extra.com/html/bellini/boa605p/boa605p_installation-and-operation-instructions_2729829020.webp)
19
Remove the door
Full open the door.
Fold up the right and left side of locking rod. (
Fig
A)
Close the door until reach to stop step, hold on both left
and right sides of the door, then reclose the door, upward
and downward and pull out the door.
Install the oven door
Accord to the opposite order of door disassembly
When install oven door, make sure both hinge plug into opening
mouth directly.
Both sides of hinge rabbet must bite up each other.
When open the door, spread down locking rod
(
Fig
B)
If the door drop accidently or hinges shut up suddenly, do
not push you hand in hinges. Please call your after-sell
department.
Remove and install door panel
Remove
Remove oven door, put it on a piece of cloth.
Using one hand to push the outside glass, the other hand to
pull the inside glass, hold the glass then pull out the glass.
Notice! Dangerous!
If the glass has some scratches, it may lead to crack.
Don’t use the glass spatula, acute and corrosive cleaning
product or detergent to clean the glass.
Install
Plug the inner glass into glass pressure groove.
Both right and left sides need put down alignment to card slot and push the glass to its
place.
Put on the oven door.
Replacing the oven lamp
If the bulb in the oven Light fails, it must be replaced. Risk of electric
Shock!
Switch off the circuit breaker in the fuse box.
Place a tea towel in the oven when it is cold to prevent damage.
Unscrew the glass cover by turning it anti-clockwise.
Replace the bulb with one of the same type.
Screw the glass cover back in.
Remove the tea towel and switch on the circuit breaker.