14
Timer Instructions
To set the Time of Day
Step 1 Make sure all the oven controls are turned off.
Step 2 Check that the electricity supply to the oven is switched on.
Step 3 When switched on the display will show 0.00 and
Auto flashing intermittently.
Step 4 Press and hold the and buttons together (the
display shows 0.00). At the same time press either the “+” or “-
“ button to set the correct time of day.
RELEASE AND THE TIME OF DAY IS NOW SET.
To set Timer to switch
(This allows you to cook immediately for a chosen period of time
OFF
Automatically
before the oven switches OFF Automatically)
Step 1 Ensure the time of day is set correctly.
Step 2 Place food onto the correct shelf position in the oven.
Step 3 Turn the oven control to the required temperature (The oven
Cookpot Symbol
should now be operating).
Step 4
Press and release the button. The display will read 0.00 with the
cookpot lit.
Within 2 seconds press and hold the “
+
” or “
-
“ button until the
required cooking period is set.
(Adjustment can be made by pressing the “
-
“ button)
The timer display will revert to the time of day with the Auto symbol
Cookpot Symbol Disappears
and Cookpot lit.
At the end of the cooking period the Auto symbol will flash and an
intermittent bleeping sound will be heard. This will continue for
approximately 2 minutes unless the timer is reset within this period
(See step 6).
The oven will no longer operate until the timer has been reset to
manual operation (See steps 5 & 6 on the next page).
