Belling IH60 UK, Руководство пользователя и инструкция по установке

Страница: 12 / 24

using the hob - induction
hob status
codes
Fault description Action
u
Indicates no pan or suitable pan on cook zone
Ensure correct pan size and that the pan is
suitable for induction use (Check with a magnet)
h/c
Heater Over Temperature Product will auto reset,
Indicates pan overheat
Allow hob to cool
c/P
Heater Over Temperature Product will auto reset, Pan
overheat
Allow hob to cool
h/c
Induction Generator Over Temperature Check installation and free air flow to hob
h
Residual Heater
No Fault “ H” will switch off when glass surface
drops below 60
℃
Appliance
errors &
Alarms
Fault description Action
F0
Software Error Switch the power off and on, system should reset
FA
Safety key Error Switch the power off and on, system should reset
Fc
Safety key Error Switch the power off and on, system should reset
Fe
Touch Ntc Error Switch the power off and on, system should reset
Ft
Touch Ntc Error Switch the power off and on, system should reset
Fc
Touch Ntc Error T<90
℃
Advice do not put hot pans on control area,
system should automatically reset when allowed
to cool.
Fh
EPROM Checksum Error Switch the power off and on, system should reset
FJ
Security Key Error Switch the power off and on, system should reset
FL
Keyboard Error, Light Condition
Switch off any lighting, before applying power to
the hob unit, (lights can affect the touch control
initial calibration process)
Fu
Security Key Error Switch the power off and on, system should reset
Appliance
errors &
Alarms
Fault description Action
F5
Communication Error Switch the power off and on, system should reset
F1
Induction heater NTC error closed Switch the power off and on, system should reset
F2
Induction Heater Ntc Error Open Switch the power off and on, system should reset
F7
Induction Ntc Error Switch the power off and on, system should reset
F8
Induction Ntc Error Switch the power off and on, system should reset
F9
Induction Relay Error Switch the power off and on, system should reset
F3
Induction Ntc Error, Closed circuit Switch the power off and on, system should reset
F4
Induction Ntc Error, Open circuit Switch the power off and on, system should reset
F6
Induction Error
Ask installer to confirm correct connection to
power supply, ensuring link is in place.