1234567890
1234567890
1234567890
1234567890
1234567890
1234567890
1234567890
GB
6
3
2
LA2505-030
LA2505-040
A
P
C
5.1 LEVELLING
Place the appliance in the spot where you want to install it. Use feet P (unscrew or screw in) to regulate
(if necessary) the height of each foot to ensure that the appliance is positioned fully level. (See figure 2).
- In order to ensure good stability, your machine must be installed under a continuous worktop, which
is securely fixed.
- The machine is designed as a dishwasher and must not be used for any other purpose.
- Do not use solvents in the dishwasher
- The water inside the machine is not drinkable.
- At the end of the products servicable life, break the door closing system to prevent children closing
themselves in. Cut the cable flush with the outer casing, after first removing the plug. Destroy the plug
to remove any danger to others, and take the machine to the nearest recycling centre.
To achieve the best performance from your dishwasher, ensure that the appliance is completely level.
Maximum error = 2 degrees
After levelling the appliance, regulate the hook of the door closing mechanism, to ensure that the door
closes correctly.
In order to obtain a good seal, adjust the door locking device accordingly.
INSTALLATION
5
5.2 WATER CONNECTION
The water supply tube C, (Supplied with the dishwasher)
connects the appliance to the tap with a 3/4" attachment
The connection procedure is as follows:
• Attach tube C to the cold water Tap A.
• If the tube is being attached to new pipes that have not
been used for a long time, you should let the water run
for some time before attaching the tube. This is in order
to make sure that dirt and rust residues are reduced to a
minimum.
• Make sure that the water pressure corresponds to the
range indicated on the data tag.
The appliance may be connected to the cold water sys-
tem. It must not be connected to the hot water system.
2.1
M