INST
ALL
ATION
INST
ALL
ATION
22
13.500
with a contact opening width of at least 3mm must be provided.
2. Use a 13 amp fuse.
3. A type HO5 V V-F cable must be used as the mains lead. The cross section
must be a minimum of 1.5mm².
4. The mains terminal block is sited on the right of the angled part of the
service panel.
5. Follow the terminal block connection schematic.
6. Firstly open the terminal block cover by inserting a small flat bladed
screwdriver into the door release tabs.
7. Remove the cable clamp screw to release the cable clamp.
8. Strip the wires back & connect to the terminal block as appropriate.
9. Fit the cable clamp & secure with the screw provided.
10. Close the terminal block, ensuring that the cover is closed and all screws
are tight and in place.
STEP 4: SECURE APPLIANCE INTO HOUSING UNIT
Note : The unit housing the appliance must be ap-
propriately fixed. Ensure that the appliance is centrally
located. Take care not to damage the appliance or
cabinet.
60cm ovens Fixing positions
•
Open the oven door and screw the 4 fixing screws
through the holes in the front frame.
