4
INSTALLATION
•
This appliance is NOT intended for use in commercial environments.
•
Please observe the installation instructions provided and note that this
appliance should only be installed by a qualified technician. Incomplete or
improper installation could lead to safety issues and make your warranty void.
•
The fitter is liable for any damage resulting from incorrect installation.
•
This appliance is only intended to be fully fitted in a kitchen.
•
This appliance is not designed to be used as a tabletop appliance or inside a
cupboard.
•
The fitted cabinet must not have a back wall behind the appliance. A gap of at
least 45mm must be maintained between the wall and the base/back panel of
the unit. There must also be a ventilation opening of 25cm
2
on the front of the
fitted cabinet - to achieve this, cut back the base panel or fit a ventilation grille.
•
Ventilation slots and intakes must not be covered.
•
The unit into which the appliance is fitted must be heat-resistant up to 90°C.
•
Do not hold or carry the appliance by the door handle. The door handle cannot
hold the weight of the appliance and may break off.
cm
2
cm
2
cm
2