12
OPERATION
Touch the once, the appliance will enter the steam mode. You will notice the
screen showing the default steam level 100 (this is displayed as a temperature but
it is a percentage) and default time of 10:00 minutes. The current water level will
also be displayed.
To change the steam level,
touch the and when the 100° is flashing touch
the to decrease the steam level to anywhere between 50 - 100.
To change the time,
touch the and when the 10:00 minutes is flashing,
touch or to give desired time. Touch the to start. The maximum time
is 90 mins.
If at any time an error has been made, simply touch the (stop) and start again.
10. Steam Cooking Function
Before starting the steam cooking function,
please clean the water tank.
During the steam cooking function,
if the tank is short on water a buzzer will ring
while the screen icon will show water status is low to remind you to add water. To
add water touch the to release the water tank. Fill the tank with water and place
it back into the appliance and cooking will resume.
After the steam cooking function is finished,
the water in the boiler will be
withdrawn back to the water tank. This process can last for about 1 minute. During
this process if the water tank is full, the buzzer will beep 10 times to remind you to
empty the tank. After the water tank has been emptied the system will continue to
withdraw water. After steam cooking, please remove the water from the water tank.