Belleze 014-HG-PH00, Руководство пользователя

Страница: 11 / 24

11
5
6
5. Attach 3 washer and 3 reflector spacer on top of the screen cove. Tighten the reflective space.
Then unscrew 4 bolts from the bottom of the control box.
FF
GG
x 3
Reflector Spacer
x 3
6-1. Insert hose of Head Assembly into Upper Pole. Secure Head Assembly to pole with
Stainless Steel Bolts.
6-2.Put the Upper Pole onto the Lower Pole, using 4pcs Screw 3/16” to firmly secure 2pcs Pole.
The warning label on the Upper Pole should be on the same side as the flat plate of the Lower Pole.
Note1: The control knob on head assembly should be above the decal on pole. When applicable,
visually checking portions of the hose assembly located within the confines of the heater post.
Note2: Insert the regulator hardly through to the lower pole.
MM
x 4
Screw 3/16”