PAGE 2
OPERATIONS AND MAINTENANCE PROCEDURES
CONVEYOR TOASTER MODELS
JT2, JT2H, JT3, JT3H AND JT3BP
POWER SAVER FEATURE
All toasters come equipped with a
Rotary Power Saver Switch
. To operate, turn clockwise or
counterclockwise to place the toaster in the following modes:
FULL POWER
– In this position, the toaster is at full heat and ready for toasting.
OFF
– There are two OFF positions provided so that a single rotation in either direction will turn
the toaster OFF.
STANDBY
– When in STANDBY overall electrical consumption is reduced by 75%. There is
just enough heat to warm the inside toasting chamber walls and reflectors. Conveyor does not
turn in standby mode. When switched to the FULL POWER position, a minimal amount of time
is required to reach toasting temperatures.
TOASTING PROCEDURE
A.
BREAD TOASTING
Toasters with a 3” high slot opening (JT2-H and JT3-H) are equipped with a heat shield designed
to reduce heat loss through the front. The shield should be adjusted so that the highest bread
product being toasted fits under it. Excess height will allow heat loss through the front and may
reduce capacity.
•
Turn the Power Saver knob to the “Full Power” position.
•
Set the Conveyor Speed Control knob to 50.
•
Set each Variable Heat Control (Top and Bottom) to HI (10).
•
Allow 10 – 15 minutes to heat from cold.
•
Place a sample of the desired product on the Conveyor Belt to test the settings.
•
If toasting is too light, turn the Speed Control counterclockwise to a slower speed.
•
If toasting is too dark, turn the Speed Control clockwise to a faster speed.
(NOTE: Some products may require adjustment of the Top and Bottom Variable Heat Controls
in order to achieve the desired results. This occurs mostly in Bun Toasting when only one
surface requires deep toasting)
Buns, Bagels and English Muffins may be tested the same as above but with either Variable Heat
Control reduced. It is recommended by Belleco, Inc. that such one sided toasting be done cut-
side up to prevent lines on the toasted surface.
Total Restaurant Supply - https://totalsupply1.com - Toll Free 1-800-944-9304 - Local 507-288-9454
2940 Hwy 14 W, Rochester, MN 55901