14/16
Slave Addr Set -- 0
Guard Unit Set -- 0
Date/Time Set...
Other Settings...
Information...
Exit
５
４
２
６
Scene
user
S7. Screen and volume adjustments
During monitoring and talking, touch the MENU key. The
ADJUSTMENTS MENU
will be displayed. Use the keys to select
the adjustment item; use the keys to decrease/ increase the value.
1. The first item is
Scene
mode selection. A total of 4 screen modes can
be selected in sequence: NORMAL, USER, SOFT, BRIGHT. Whenever
you modify
Brightness
or
Color
, the
Scene
item will be set to USER
mode automatically.
2. The
Brightness
and
Color
items adjust the quality of the image. Adjust
the values to get a good quality of the image on the monitor.
3. The
Ring Volume
and
Talk Volume
items adjust the ring tone and
talking volume.
4. Note that all the modifications will be done immediately after the
operation. Touch the MENU key again to exit the
ADJUSTMENTS
MENU
.
S5. Restore to default
Select
Advanced set...
Select the
Information...
item, this item will show information about
the product: Hardware and software version, voltage information,
manufacturing code.
To set all the parameters of the terminal to initial values, select
Restore to default
item, then touch the MENU key . ( Note that the
Restore to default
operation will not change the time and date
settings.)
Select
Exit
and touch to return to the
MAIN MENU
page.
S6. Unlock parameter settings
After the installation of a electromagnetic lock or of an auxiliary
automation the
Unlock parameter
has to be set from the terminal.
Select
Advanced set...
Select the
Information...
item and touch the MENU
key
.
Select
Restore to default
without touching again the key .
If the keys are disabled (unlit), touch first the ON/OFF
key and then touch the Access key and hold for 2s.
Use the keys to select
an
item. Use
the
keys to decrease/
increase the value of the item. Settings will be performed
immediately. Select the
Exit
item and touch to exit.
Note
:
1. If one electromagnetic lock is installed the
Unlock Menu
must be
set to
1
.
2. If there is one electromagnetic lock and one auxiliary automation
connected to the system, the
Unlock Menu
must be set to
0
. In this
mode, touch the Access key , two lock icons will be showed. Use
the keys to select the item you want, and touch the Access
or MENU key to release the corresponding lock.
3. The
Restore to default
operation will not change the
Unlock Menu
setting.
4.
Unlock mode
is not functional.
5. Select
Unlock Time
to set the time interval for the unblocking of the
lock: 1..9 s.
Hardware ver 0302
Software ver 0168
Voltage 22.4V
Manufacture 00.0T
Restore to default
Exit
Unlock Time 3
Unlock Mode 0
Unlock Menu 1
Exit
1
2
Slave Addr Set -- 0
Guard Unit Set -- 0
Date/Time Set...
Other Settings...
Information...
Exit
setup
setup
