Bella 10 CUP PROGRAMMABLE THERMAL Скачать руководство пользователя страница 8

Страница: 8 / 24

Setting the CURRENT Time

NOTE:

You do not need to set the CURRENT time if you are not using the PROGRAM (future brew) feature.

1. Plug the Coffee Maker into a 120V AC electrical wall outlet. The LCD display will illuminate blue.

NOTE:

By default, 12:00 AM will be displayed, and will be flashing.

2. Press the HOUR button to increase the hour. Once the desired hour is displayed, press the MIN button to

increase minutes until the CURRENT time is displayed. Press and hold HOUR or MIN to toggle quickly.

NOTE:

Pay attention to the AM and PM setting.

NOTE:

The blue backlit LCD display will advance to sleep mode within 15 seconds if no buttons are pressed.

The CURRENT time can be changed at any time by simply repeating Step #2.

IMPORTANT:

If you unplug and replug the Coffee Maker it will reset to the default time.

BREWING COFFEE
Making Coffee Immediately

NOTE:

The amount of brewed coffee will always be less than the amount of water placed into the water reservoir;

as much as 10% is absorbed by coffee grounds and filter.
1. Lift to open the Coffee Maker lid. Fill carafe with cold tap water and pour into water reservoir at the back

of the unit. The water level can easily be seen from the viewing window on the side of the unit.

NOTE:

Ensure water does not exceed the 10 cup line.

2. Place empty carafe on the base.
3. Place the permanent filter in the removable filter holder. Measure 1 level tablespoon or 1 scoop with

the provided scooper cup, of drip or regular grind coffee for each cup of coffee desired. For stronger
or milder coffee, adjust amount of coffee to suit your taste.

4. Lower the filter holder down into the housing. Close the lid.
5. Plug the power cord into 120V/60HZ power supply outlet and press the ON/OFF button once; the light

around the ON/OFF button will be illuminated (blue). The appliance will begin working.

NOTE:

You can take out the carafe, pour and serve at any time. The appliance will stop dripping

automatically, but the time cannot exceed 30 seconds.

NOTE:

To cancel the brew cycle at any time, press the ON/OFF button.

WARNING:

Do not open water reservoir lid when the coffee maker is operating.

6. When the brew cycle is complete 3 audible beeps will be heard, the coffee maker will automatically turn off and

the light around the ON/OFF button will turn off. The TIME SINCE BREW

will appear on the LCD display and

the TIME SINCE BREW will count up from 0:00 to 02:00 to let you know how fresh your coffee is.

NOTE:

As safety is concerned, be sure to cover the lid of carafe when pouring.

NOTE:

To check the current time press the PROG/BOLD button. The TIME SINCE BREW icon

will

disappear and the current time will appear for 5 seconds. Once the 5 seconds is reached, the time since
brew and the TIME SINCE BREW icon

will reappear.

7. After 2 hours the coffee maker will beep 3 times, the TIME SINCE BREW icon will disappear. The current

time will reappear on the LCD display

NOTE:

Unplug the power cord from the electrical outlet when the appliance is not in use, left unattended,

or when the carafe is empty.

Tip:

Warm the thermal carafe with hot tap water before brewing to maintain optimal brew temperature longer.

Tip:

Ensure the lid of the thermal carafe is in the lock position prior to brewing and when pouring.

Setting the PROGRAM (Future Brew) Time

Coffee Maker can be programmed to begin brewing up to 24 hours in the future.
1. Press the PROG/BOLD button until the word “PROG” appears on the LCD display.

NOTE:

By default, 12:00 AM will be displayed, and will be flashing. The blue backlit LCD display will

advance to sleep mode and the “PROG” icon will disappear within 15 seconds if no buttons are pressed.

2. Press the HOUR button to increase the hour. Once the desired hour is displayed, press the MIN button.

Press and hold HOUR or MIN to toggle quickly.

3. When the future auto PROGRAM time is displayed, press the PROG/BOLD button. An audible beep

confirms the selection and “PROG” appears in the display. The ring around the PROG/BOLD button
will illuminate blue.

NOTE:

Pay attention to the AM and PM setting.

NOTE:

Make sure the coffee maker is ready to brew by repeating steps 1-5 of the MAKING COFFEE

IMMEDIATELY section