1. Drill two holes with a vertical distance between the two marked positions of 3
15/16
” (100
mm) as shown in Figure 6.
(Figure 6)
2.
Drive a screw into each of the holes. Tighten them to the end of the screw line, only
leaving the smooth part of the screw head outside the wall.
3.
Hang the unit onto the screws, then slide it down firmly to
fasten the base securely.
BELT CLIP INSTRUCTION
Clamp the belt clip at the back of the handset as shown in Figure 7.
CONNECTING THE HEADSET
For hands free conversation, a headset (not included) is connected to the headset jack as
shown in Figure 8. The handset receiver and microphone are disabled when the headset is
connected.
(Figure 8)
Press the TALK button to answer or place a call using the headset. Refer to the
manufacturer’s headset manual for more details.
