Saving files to microSD
The process of saving files to the microSD memory card on your device
is similar to saving files to any external flash drive on your computer.
Saving files from an application:
1. Insert the device into your computer’s USB port.
2. The computer will detect new hardware and the Unplug/Eject icon
will appear in the taskbar.
3. Go to
File > Save As
.
4. Click the down arrow within the
Save in
box to view the contents of
the pull-down menu.
5. Select the Turbo Stick which appears as a drive letter
(e:\, f:\, g:\, etc.) [Mass Storage or Removable Storage].
6. Type a name for the file you are saving to the device and click
Save
.
Lanyard & keychain accessories:
The lanyard & keychain is a convenient accessory that gives you
maximum portability while on the go.
IMPORTANT:
DO NOT WEAR THE LANYARD AND DEVICE AROUND
ROTATING MACHINERY OR DURING SLEEP. AN EMERGENCY RELEASE CLIP
IS CONSTRUCTED INTO THE DESIGN; HOWEVER, IN AN EMERGENCY YOU
MAY ALSO CUT THROUGH THE MATERIAL.
Affixing the lanyard or keychain to the Turbo Stick:
1. Remove the cap and locate the lanyard hook on the device and on
the cap.
2. Pinch the looped thread on the lanyard or keychain and insert the tip
of the thread into the hook hole on the cap and through the Turbo Stick,
pushing the thread until it exits on the other side of the hook hole.
3. Push the cap on the device and insert the end of the lanyard or
keychain through the loop. Pull to tighten.
