Now that the Mobile Connect Basic software is installed on your
computer, your Turbo Stick can be inserted or removed at any time.
As an external device, the Turbo Stick is vulnerable to damage during
transport. It is recommended that you remove and securely store the
device when transporting your computer.
To insert your Turbo Stick:
1. Remove the protective cap from the device.
2. Insert the Turbo Stick into the USB port. Do not forcibly insert the
device, as this may damage both the device and the USB port.
3. The computer will beep.
4. Start Mobile Connect Basic from the desktop or from the
AutoPlay
prompt.
5. The Turbo Stick powers on when inserted.
To remove your Turbo Stick:
1. Disconnect and quit Mobile Connect Basic.
2. Carefully remove the Turbo Stick from the USB port.
3. The computer will beep.
Using your Turbo Stick on another computer:
The Turbo Stick can be
used on multiple computers. Simply insert it and install the Mobile
Connect Basic software on each new computer you wish to use. Please
note that data network usage is tied to the device itself and that usage
between computers is cumulative and will be billed together.
Inserting and removing the 3G Turbo Stick
from your computer
