STeP 1: Set the wheel value–
First, using the table provided, determine the correct, 4-digit, wheel value
based on the size of your tire. The wheel value is the distance in millimeters per one revolution of the wheel.
Next, press and hold the left or right MODE button and the SET button for two seconds. The preset value “2124”
should appear with the digit “4” flashing. Press the right or left MODE button to modify the digit to the correct
setting (hold either MODE button down for fast advance). Once correct digit is shown, press the SET button to
move to the next digit. Repeat until all four digits are set to the correct wheel value for your bike.
NOTe:
You can return to the wheel size input mode by pressing and holding both the MODE and SET buttons
for 3 seconds. Removing the battery will erase the wheel value.
STeP 2: Set KM or Mile Selection–
After
setting the wheel value, the KM/M selection will
appear. Press the left or right MODE button to
choose kilometer or mile selection. Press the SET
button to confirm.
STeP 3:
input Age and weight–
After setting
the KM/M selection two numbers will appear. Enter
your age as the large number above the horizontal
line. Press the left or right MODE button to modify
the “ones” digit to the correct setting. Press the
SET button to confirm. Repeat for the “tens” digit.
Enter your weight as the smaller number below the horizontal line following the same steps.
By entering your actual age and weight, you will get a more accurate calculation of calories and fat burned
NOTe:
The computer will default to kilograms (72.6kg) or pounds (160lb) based on your selection of kilometers
or miles respectively.
road Bike
20"
1596
22"
1759
24"
1916
26"
2073
27"/ 700c 2124
Mountain Bike
24"
1888
26"
2045
27"
2155
28"
2237
Programming the ComPuter
