Connecting Bell Tents together
1.
Before erecting the tents, ensure that the distance and positioning between both tents is correct.
2.
Take the horizontal awning pole and line it up over both A frame spikes.
3.
Place the canvas over the horizontal pole and secure the canvas to both spikes.
4.
Pull out the canvas and secure all the guy ropes with the pegs.
5.
NB This set up only works if one of your tents has two doors like the 6m Pro Twin Door but you can use it
with single door tents if you use the Additional Pole Set to raise one side of the awing to create an entrance.
Tips and Hints
Despite being adjustable, you may find that the vertical pole is too long for a 3 Metre of 4 Metre Bell tent.
This can be corrected by removing the rubber foot, and using a hacksaw to cut off the desired amount.
For further tips and advice, give us a call on 07830 355 993.
Don’t forget to share your photographs and experiences with us via our
Facebook page or at [email protected].
