Bell System bellview, Руководство по установке и эксплуатации

Страница: 37 / 58

Bell View Video System
Page 2 of 4
2 - 10 Way Single Door Systems
Cable Requirement
(Refer to diagrams 3a and 3b.)
Cable types (solid core)
0.5 mm Twisted pair, e.g. BT spec CW1308
1.0 mm 1.0 mm
2
‘Twin & Earth’
1.4 mm 1.5 mm
2
‘Twin & Earth’
Co-ax 75 Ohm, RG59 or equivalent
Video phones
Total Cable Length Video Power (+,-) Other connections
(N = no. of video phones)
Video Signal
Basic Functions
25 m 9+N @ 0.5 mm [, -] 75 Ohm Co-ax
50 m 2 @ 1.0 mm 5+N @ 0.5 mm 75 Ohm Co-ax
100 m 2 @ 1.4 mm 7+N @ 0.5 mm [double V, O] 75 Ohm Co-ax
Basic Fun Door Monitor Facility
25 m 10+N @ 0.5 mm [, -] 75 Ohm Co-ax
50 m 2 @ 1.0 mm 6+N @ 0.5 mm 75 Ohm Co-ax
100 m 2 @ 1.4 mm 8+N @ 0.5 mm [double V, O] 75 Ohm Co-ax
E.g. 10 Video phones with basic functions over a 50 m length requires; 2 common conductors @
1.0 mm, 5 common conductors @ 0.5 mm and 10 individual call lines @ 0.5mm.
Notes
Assumes only 1 video phone is active at a time and the phones are distributed evenly along the cable run.
Loop the coaxial cable from phone to phone (daisy-chain wiring). Do not run a separate cable from each video phone back to
a common junction (star wiring).
Where possible (for optimum speech clarity), a twisted-pair should be used for ‘R’ and ‘O’ connections.
Entrance
Connections No. of Cores Max
Length Solid Core
Diameter
Speech unit 6 + 75 Ohm Co-ax 50 m 0.5 mm
Push Buttons 1 per phone 50 m 0.5 mm
Lock Release (up to 0.5 A) 2 25 m
100 m 0.5 mm
1.0 mm
Trades button (optional) 1 50 m 0.5 mm
Exit button or Fire switch (optional) 2 100 m 0.5 mm
Door monitor switch (optional) 2 100 m 0.5 mm