tabellet Apartment Station 2-72 Way System
PD-307 Issue 2
Installation and Operating Manual
Page 16 of 48
Apartment Station
The tabellet is designed to be surface mounted onto a plaster or plasterboard wall using
the supplied steel bracket. The optimum screen height is 1.6m however DDA
considerations may reduce this height to 1.4m.
Instructions:
Warning.
The heads of the countersunk screws must protrude less than 1mm or there will
be difficulty attaching the apartment station to the plate.
1) Using the bracket as a template, cut a square hole into the plasterboard ensuring
that the terminal block and other components on the back of the tabellet will clear.
2) A back-box is not required, however a standard flush-mounted single gang back-
box can be fitted if desired. The back box does not have to be secured to the
bracket but if this is desired, it is recommended that the bracket and back box be
bolted together first and then fitted to the wall as a single item.
3) Fix the bracket to the plasterboard using up to 8-off No8 (4mm) screws and suitable
plasterboard plugs. Ensure that the bracket is absolutely level when fitted.
4) Fit the tabellet unit by aligning it onto the 4 hooks of the wall bracket, and then
pushing gently towards the wall and sliding the tabellet down until it “clicks” into
place.
5) The tabellet can be removed from the wall mounting box by pushing upwards until it
slides off the bracket. When up far enough it will come forward and the wiring can
be accessed.
Doorbell
The tabellet has a doorbell function which typically would be operated by a local, non-
illuminated door push having a normally open contact.